Ebensburg

Pennsylvania

Documents

Sewer Rules & Regulations

View original document →

Ebensburg Municipal Authority Sewer Rules & Regulations Summary

This document outlines the rules and regulations governing sanitary sewer service in Ebensburg, Pennsylvania, effective April 1, 2019. It is published by the Ebensburg Municipal Authority (the “Authority”) and applies to all users connected to the system.

Key Entities & Responsibilities

  • Ebensburg Municipal Authority: Owns the sanitary sewer system; responsible for setting rates/fees, capital improvements, debt management, permits, and adopting these rules.
  • Borough of Ebensburg: Leases the system from the Authority; handles day-to-day operations, maintenance, billing, collection, financial accounting, and enforcement of these rules.
  • Customers: All persons, firms, corporations, or municipalities connected to the system are bound by these rules as part of their service contract.

Core Definitions

  • Abnormal Waste: Wastewater exceeding 350 ppm suspended solids or 300 ppm BOD — considered abnormal and likely prohibited.
  • Application: Must include service charges, installation schedule, and contractor registration to be complete.
  • Authority: Includes the Ebensburg Municipal Authority and its authorized representatives, including the Borough of Ebensburg.

Service Connection Requirements

  • New connections require proper installation per approved diagrams (see Appendix A).
  • Must connect laterals using compatible pipe types (e. g. , SDR-35 or adapt to SCH. 40 if applicable).
  • Trap and vent assemblies must be PVC, SCH. 40 pipe and fittings.
  • Backflow prevention device is optional but recommended.
  • Viewport stack acceptable only if service stub is 4".

Prohibited Activities & Wastes

  • No unlawful use of the sanitary sewer system.
  • Fats, oils, and greases (FOG) are regulated — likely prohibited from discharge.
  • Industrial discharges subject to special controls.
  • Prohibited wastes include anything that could damage the system or violate environmental standards.

Fees, Billing & Payments

  • Connection fees apply for new services (detailed in Section Five).
  • Billing handled by the Borough; late payments incur penalties.
  • Rates and fees established by the Authority (Section Twenty-Seven).

Enforcement & Penalties

  • Right of inspection granted to the Authority/Borough.
  • Failure to connect when required may result in penalties.
  • Maintenance and repair obligations fall on the customer for lateral lines.
  • Penalties outlined in Section Twenty-Nine for violations.

Appeals & Dispute Resolution

  • Connection appeals allowed under Section Thirteen.
  • Variable acceptance of non-system products may be granted case-by-case (Section Seventeen).

Technical Specifications (Appendix A)

  • Frame and cover must be East Jordan Iron Works Inc. , Pattern No. 1565 or Neenah Model No. R-1975-A2 or equal.
  • Minimum depth: 2’–8” below grade.
  • Max distance from building wall: 5’–0”.
  • Sanitary tee, cleanout, and trap/vent assembly required per diagram.

Contact Information

  • Address: 300 West High Street, Ebensburg, PA 15931
  • Phone: 814-472-8780
  • Email: eburg@ebensburgpa. com
  • Website: www. ebensburgpa. com

These rules ensure safe, efficient, and compliant operation of the municipal sewer system. Residents and businesses must adhere to connection standards, waste restrictions, and payment obligations to avoid penalties or service discontinuation.

← Back to Documents